sldkjfalksj Author Archives: Ike Erb

Heat

Posted on by

Want to improve energy savings in the winter? Here are some tips!

Fath Properties’ goal is to provide seventy (70) degree heat to all apartments where we control the heat.  The majority of residents find this to be a comfortable temperature, and it allows us to sensibly manage our costs and do our part to conserve energy.  If your apartment’s temperature is between sixty-nine (69) and seventy-one (71) degrees, your heating system is probably working fine.  Apartment temperatures will vary slightly from unit to unit.  If your apartment is cooler than seventy (70) degrees, and no other problems exist with the system, there are several things you can do to maximize the temperature:

  • Furniture or other items set in front of your heat registers or vents will keep the heat from circulating in the apartment. Please keep all items at least eight (8) inches away from registers or vents. Proper circulation is essential!
  • Make sure all windows and doors are tightly shut. If there are still heavy drafts around windows or gaps in doors, please call your leasing office to have this addressed.
  • Make sure the vent(s) on your wall unit air conditioner(s) are in the ‘closed’ position and that there is not air sweeping in around the units.
  • It is normal for windows and the area around them to feel cold to the touch since glass is not a good insulator. Heavy insulated drapes and curtains are the best way to minimize the effect of this cold air on the apartment temperature.
  • If you have baseboard registers, make sure the metal flap inside is lifted all the way up and that you can see inside the register. This flap acts as a vent; if it is resting down on the front panel, the heat cannot escape.
  • If you have a forced air system, make sure your thermostat is set on ‘Heat’ and ‘Auto’.
  • Finally, please dress for the season, i.e. sweaters, heavy shirts, and slacks. Few people are comfortable in T-shirts or shorts, even inside, in the winter.

If you have further questions or need service for your heat, please contact your community leasing office. We will be happy to send out a maintenance technician.

Garbage Disposals

Posted on by

Garbage disposals operate virtually trouble-free when used properly.  These helpful procedures and tips will lead to a long life for your disposal and easy operation.

When running your garbage disposal…

  • Turn cold water to maximum flow position.
  • Flip the switch to the “on” position.
  • Push refuse through the splashguard keeping hands away from the inside chamber.
  • Continue to run the disposal until the grinding sound stops, and then flip the switch to the “off” position.
  • Continue to run cold water for two to three minutes to be sure all of the waste particles have been flushed away.

Below are some DO’s and DON’T(s) for disposal usage

 DO:

  • Grind a citrus peel or put baking soda down the drain to keep the disposal odor free.
  • Run plenty of cold water during and after operation.
  • Grind coffee grounds.

 DON’T:

  • Never put your hand down a disposal when it is running.
  • Do not use hot water when operating a disposal.
  • Never try to put too much through a disposal at once.
  • Never put any of the following items into a disposal

Fibrous materials (cornhusks, artichokes, etc.)
Clam, oyster, or nutshells
Fruit/vegetable pits or seeds
Rice
Pasta
Eggshells
Bones
Drain cleaner
Tea bags, potato or banana peels, celery, tomatoes
Grease
Wooden objects
Glass, china, plastic
Metal objects (bottle caps, aluminum foil, tin cans, utensils)
Dishrags

If the motor has stopped due to overloading, turn the disposal off.  Wait three to five minutes, and then push the reset button (located under the sink on the unit itself).  Then follow normal operating procedure.

If the disposal has jammed, turn the power switch to the “off” position before attempting to remove an object.  With tongs, remove any objects that might be obstructing the free movement of the blades.  In many cases, a broom handle can be inserted into the mouth of the disposal and turned in a circular pattern to free the blades.

Once movement has been restored to the blades, push the reset button on the disposal unit.  Then follow normal operating procedure.

Of course, if you ever run into an issue you cannot resolve yourself, our friendly maintenance team will be happy to help. Just call your leasing office and we will schedule a friendly maintenance technician to come to your apartment home.