Out, Damned Spot; Out I Say!

• Lady Macbeth

Racked with guilt over her complicity in the murder, Shakespeare’s Lady Macbeth famously exclaims, “Out, damned spot; out I say!” while wringing her hands to remove a hallucinated bloodstain. You may be tempted to say something similar – or much worse – when suddenly faced with a horrifying spill of red wine on your carpet.

It’s always a sad moment when that delicious glass of red winds up on the floor instead of in your belly. My good friend Stacy never fails to drip, dribble, spill, or splash whenever we get together. I have honestly never met anyone as clumsy with food and drink as she. Fortunately for us both, she is also a wizard at removing stains from everything – including carpet – with products you already have in your home.  Her advice?

• Blot Up ASAP. Gently blot with paper towels from the outside edge of the spill to the center. Act quickly before the wine’s natural dyes and acids work their way into the carpet fibers.
• Select a Solution. See four options below:
  • Straight club soda.
  • One tablespoon each of white vinegar and liquid dish soap mixed in two cups of warm water.
  • Table salt – enough to cover the spill.
  • Wine removal product such as Wine Away (under $10 from Amazon).
• Test Solution. Test the solution on a small inconspicuous area for colorfastness.
• Dab and Blot. Dab your solution of choice in small amounts on the spill with a soft, clean white cloth (an old T-shirt will do nicely!), again working your way from the outside of the spot to the center. Don’t be tempted to dump the mixture all over the stain as it will cause it to spread and may damage the carpet’s backing.
  • NOTE: If using salt, cover the stain, let sit until dry, then vacuum.
• Rinse. Rinse the cloth frequently to avoid spreading or reintroducing the wine to the area.
• Rest. Let everything sit for five to 10 minutes.
• Rinse. Rinse the area with cold water.
• Blot and Repeat. Blot with a white towel. Repeat until no more color transfers to the towel.

Theoretically, you can use white wine to remove a red wine stain by following the above steps.. If wasting any wine on a spill shocks you to your core, consider having vinegar, salt, or Wine Away at the ready before you pop the cork.

Cheers!

The post How To Remove Red Wine Stains appeared first on Fath Properties Blog.

Clean Your Fridge

I am not happy with whomever invented Clean Out Your Fridge Day which is “celebrated” on November 15. Do we really need to be reminded that although the rest our place looks presentable, there’s probably something creepy, hairy, stinky, and unknown lurking in the back corner of the crisper drawer? Clearly, we do, or this day would not exist. My fridge is like my closet. It will go for weeks – dare I say months – looking tidy and clean and then suddenly, out of seemingly nowhere, it looks like elves performed some horrible mischief in the night. My once neat, organized, color-coded (yes, I am THAT girl) closet is a sloppy wreck with clothes falling off the hangers and the fridge contains mysterious science-fair-like “stuff”. And it’s not like cleaning either is hard; it’s just an annoyance and an awful way to spend a Saturday morning when you could be brunching on eggs benedict and sipping mimosas. So, what is one to do? As in the words of a dear friend of mine, “Just git ‘er done”. Here’s a few tips on making this god-forsaken process a wee bit less miserable.

Prepare a Staging Area

Obviously, you must remove all the food from the fridge to clean it. Short on counter space? Set up a little folding table or use a few chairs. I am pretty successful with just removing food from one section at a time, cleaning it, and putting it back before moving on. For a complete, and uber thorough clean, put your food in a cooler. Whatever you use, you need at least enough room to hold a shelf’s worth of stuff. Make sure your kitchen sink is empty, too. While you’re at it, put the recycling bin nearby as you’ll likely be tossing expired items.

Gather Your Supplies

You won’t need much. White vinegar and/or dish soap, a spray bottle or a big bowl, a sponge and/or a scrubby, and paper and/or microfiber towels, all or most of which you probably already have on hand.  The vinegar breaks down grease and grime, and when mixed with hot water in a spray bottle (or bowl, or dishpan, or bucket), it becomes a food-safe cleaner that’s perfect for any gunk that might have accumulated on refrigerator shelves. The other items on the list will help you wipe, scrub, dry, and shine.

Work Shelf by Shelf

While some people have enough counter space (is there ever really enough?!?) to completely empty their refrigerators before cleaning, I find working one shelf at a time is often the best method, because you don't want to leave your perishables out for too long.

• Start at the top.
• Remove everything from a shelf and see just how messy you (or those darn elves!) have been.
•  If there are spills, carefully remove the glass from the frame (or brackets, depending on your fridge) and clean both sides, as well as the edges, with the vinegar solution.
• Dry with paper or microfiber towels.
• Wash the frame that holds the glass before replacing the entire shelf. For that, I usually head to the sink and use dish soap and hot water.
• If there aren’t any caked-on spills that require shelf removal, simply run a scrubby sponge under hot water. Give the shelf and fridge walls an initial scrub to loosen any gunk. Then, spray it all down with cleaner and give it another scrub, before wiping everything clean with a microfiber cloth.

NOTE: When you’re not actively working in the fridge, close the door to keep everything as cool as you can.

Doors and Drawers

Refrigerator drawers often accumulate debris, especially if they’re used for produce. For a deep clean, remove the drawers and wash them in the kitchen sink with soap and water. If they won’t fit in your sink, spray and wipe them clean, and dry them before putting them back. While the drawers are removed, wipe down the walls and “floor” of the fridge with the vinegar cleaner. Use the same method for the shelves inside the doors.

Clean It Before You Put It Back

Now that your fridge is sparkling (and you realize it wasn’t THAT BAD to clean), be sure to wipe down jars, containers, and condiment bottles so you don’t bring gunk back into the fridgeEven if it doesn’t appear dirty, it’s a good idea to give the bottom a quick wipe with a damp microfiber cloth, especially if the shelf was sticky. If any bottles or jars have accumulated a little goo on the outside, rinse them under warm water then wipe them clean and dry. If gunk has accumulated around the seal or the edges of the cap, take the lid off and wash it more thoroughly in the sink. Check all expiration dates and toss anything that’s expired, like the sriracha I just threw away from 2017. Hmmm.

Wipe Down the Outside

Once everything is back in your sparkling fridge, use a clean microfiber cloth and the vinegar spray to wipe down the outside of the doors, including the edges and seals, and don’t forget the handles! The worst area will undoubtedly be to top of the fridge as it tends to collect greasy residue from cooking and dust. I like keeping a kitchen towel on top that can just be thrown in the wash.

Keep It Fresh

You did it and you lived to tell the tale! Enjoy your super-clean fridge. For a while, anyway. If you want to keep it smelling fresher longer, stick an open box of baking soda on one of the shelves. Now treat yourself to brunch with a Bloody Mary. You deserve it.

The post Clean Out Your Fridge appeared first on Fath Properties Blog.

I’ve never really been able to wrap my head around all manner of dirt showing up in places where you clean things like hands, dishes, clothes, body, and hair. I mean, these places are usually full of hot or warm water and some kind of soap. So what’s with the dirt, soap scum, mold, mildew, and unidentifiable muck? According to Apartment Therapy, the black stuff is probably oxidized manganese, an element present in most water that tarnishes when exposed to air. Regular tap water can contain this mineral and faucets, toilets, or showerheads might accumulate some deposits. Ah, okay. But it’s still gross. And ultimately, in the case of our showerheads, it will cause the delightful forceful water spray of your shower become more like a trickle. Let’s get rid of the muck and get your showerhead sparkling clean!

Many folks delay cleaning showerheads because they just don’t realize how easy it is to clean them or just don’t think about it. As a result, over time, showerheads become clogged with deposits, making them harder to clean. The minerals in water can build up and block the openings just as they buildup on shower doors. The blockage can even prevent the interior of the showerhead from drying completely between uses, encouraging mold and mildew to grow. Plus, bacteria of all sorts thrive in showerheads, and thorough cleaning can help remove potentially harmful ones. More eww.

To save future you from an unpleasant and unnecessary ordeal, clean your showerhead routinely each week and deep clean a maximum of quarterly or at least twice a year. Why the variation in timing? It depends on how your water is, as hard water results in more mineral buildup.

Weekly Clean

• Run a scrub brush across the shower nozzles to loosen and free any buildup.
• Wipe down the entire shower head with your favorite all-purpose cleaner and a paper towel (or these cool reusable paper towels).
• Follow with a spritz of stainless steel polish spray and buff with a microfiber cloth for extra shine.

Achieving a clean, shiny shower head can be both fast and easy!

Deep Clean

Every few months, do a more thorough clean to remove mineral deposits and stave off germs from the head.

Timing

How long will the cleaning process take? It depends on the level of hard-water stains, how bad the mold is, and the severity of the clog in your shower head. Expect to spend anywhere from 10 to 20 minutes actually cleaning. But if you’re dealing with a particularly dirty or clogged model, factor in roughly six to eight hours of waiting time while your shower head soaks (so be sure to take a shower first).

The job is easier than you think, but you’ll need to adjust the process depending on what type of showerhead you’re working with.

For a regular, smaller, showerhead:

Supplies

• a sturdy plastic bag
• a rubber band or zip tie
• a few cups of white vinegar

Process

• Take a couple of thick rubber bands and slide them over the shower arm or loosely attach a zip tie.
• Fill a durable plastic bag (like a freezer or gallon zip-top bag) with white vinegar and place over the showerhead.
• Secure rubber band or zip tie around the bag.
• Leave overnight.
• Wipe off the showerhead in the morning.

PRO TIP: Use the same vinegar-and-baggie method for any faucet in your home.

Did you know? Vinegar has descaling superpowers (translation: It easily removes mineral buildup from your water).

For a larger, rainfall-style showerhead you may need to detach it to clean it:

Supplies

• Large bowl: Make sure it’s big enough to submerge your showerhead
• Distilled white vinegar
• Wrench
• Needle-nose pliers
• Microfiber cloth
• A mild bathroom cleanser
• Toothpicks
• Metal polish: Brasso can help with stubborn hard-water stains on metal showerheads.
• Sealant tape: Also known as plumbers tape, this thin wrapping helps prevent water from seeping out when you screw a showerhead back onto the arm.

Optional supplies

• Safety glasses to help protect your eyes from errant splashes of vinegar or cleanser.
• Step stool if you can’t easily reach the showerhead.

Process

• Use the adjustable wrench to unfasten your showerhead at the base of the arm.
• Remove any loose debris from the outside by running your hands or a soft cloth across the entire surface.
• Pull out any sealant tape that might be stuck to the internal threading.
• Remove any large pieces of debris from the small screen and/or flow restrictor just inside the showerhead with needle-nose pliers.
• Use a toothpick to poke any especially stubborn gunk out of the screen, but be very careful: You don’t want to widen the small gaps in the screen; that would allow larger bits of debris to get inside. When you’re done, place the screen and/or gasket back inside the showerhead.
• Rinse the showerhead.
• Place the showerhead in a large bowl, nozzle side up or sideways.
• Fill the bowl with equal parts distilled white vinegar and water, until the showerhead is completely submerged and swirl to help the solution run through the inside.
• Soak overnight.
• Remove from bowl and rinse thoroughly.
• Polish with cleaner of Brasso.
• Reattach using plumbers tape.
•  

PRO TIP:  Avoid using any cleaners that are abrasive or contain bleach, cleaners formulated for toilets or acids targeted to remove rust, and abrasive brushes and sponges, like the Magic Eraser.

Now that your showerhead is clean, gunk-free, and clog-free, reward your efforts with a nice long shower. Ahhhhhhh.

The post HOW TO GET YOUR SHOWERHEAD SPARKLING CLEAN appeared first on Fath Properties Blog.